Ruckus Wireless Virtual SmartZone High Scale - Updating AP Firmware; Updating AP Configuration; AP Configuration Updated; AP Configuration Update Failed

Updating AP firmware
TABLE 208 Updating AP firmware event
Event Updating AP firmware
Event Type apFirmwareApplying
Event Code 108
Severity Informational
Attribute “apMac”=“xxx.xxx.xxx.xxx” , “configID”=“23456781234”, "toVersion"="x.x.x.",
"fromVersion"="x.x.x"
Displayed on the web
interface
AP [{apName&&apMac}] firmware is being updated from [{fromVersion}] to
[{toVersion}].
Description This event occurs when AP updates its firmware.
Updating AP configuration
TABLE 209 Updating AP configuration event
Event Updating AP configuration
Event Type apConfApplying
Event Code 109
Severity Informational
Attribute "apMac"="xxx.xxx.xxx.xxx", "configID"="23456781234"
Displayed on the web
interface
AP [{apName&&apMac}] is being updated to new configuration ID [{configID}]
Description This event occurs when AP updates its configuration.
AP configuration updated
TABLE 210 AP configuration updated event
Event AP configuration updated
Event Type apConfUpdated
Event Code 110
Severity Informational
Attribute "apMac"="xx:xx:xx:xx:xx:xx", "configID"="23456781234"
Displayed on the web
interface
AP [{apName&&apMac}] updated to configuration [{configID}]
Description This event occurs when the AP successfully updates the existing configuration
details to the controller.
AP configuration update failed
TABLE 211 AP configuration update failed event
Event AP configuration update failed
Event Type apConfUpdateFailed
Event Code 111
Events Types
AP Communication Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A 157