MAP uplink connected to MAP
TABLE 247 MAP uplink connected to MAP event
Event MAP uplink connected to MAP
Event Type mapUlinkConnectToMap
Event Code 420
Severity Informational
Attribute "mapMac"="xx:xx:xx:xx:xx:xx", "secondMapMac="xx:xx:xx:xx:xx:xx",
"rssi"="xx", "meshDepth"="x"
Displayed on the web
interface
MAP [{apName&&apMac}] connected to MAP
[{secondMapName&&secondMapMac}] with RSSI [{rssi}] across [{meshDepth}]
links
Description This event occurs when the MAP connects to a second MAP with RSSI (across
links).
Mesh state updated to MAP
TABLE 248 Mesh state updated to MAP event
Event Mesh state updated to MAP
Event Type meshStateUpdateToMap
Event Code 421
Severity Informational
Attribute "apMac"="xx:xx:xx:xx:xx:xx", "newState"="xx",, "mapMac"="xx:xx:xx:xx:xx:xx",
"numHop"="x", "channel"="xx",
"downlinkState"="xx", "radio"
Displayed on the web
interface
AP [{apName&&apMac}] state set to [{newState}] uplinks to
[{mapName&&mapMac}] across [{numHop}] hops on channel [{channel}] at
[{radio}] with downlink [{downlinkState}]
Description This event occurs when the AP is set to MAP uplinks across hops on channel
radio (with downlink).
Mesh state updated to MAP no channel
TABLE 249 Mesh state updated to MAP no channel event
Event Mesh state updated to MAP no channel
Event Type meshStateUpdateToMapNoChannel
Event Code 422
Severity Informational
Attribute "apMac"="xx:xx:xx:xx:xx:xx", "newState"="xx",,"mapMac"="xx:xx:xx:xx:xx:xx",
"numHop"="x”, "downlinkState"="xx"
Displayed on the web
interface
AP [{apName&&apMac}] state set to [{newState}] uplinks to
[{mapName&&mapMac}] across [{numHop}] hops with downlink [{downlinkState}]
Description This event occurs when the AP is set to MAP links across hops (with downlink).
Events Types
AP Mesh Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
170 Part Number: 800-71565-001 Rev A