Client authentication failed
TABLE 340 Client authentication failed event
Event Client authentication failed
Event Type clientAuthFailure
Event Code 201
Severity Informational
Attribute "apMac"="xx:xx:xx:xx:xx:xx", "clientMac"="xx:xx:xx:xx:xx:xx", "ssid"="xxxxx",
"wlanId"="xxxxx", "userName"="xxxxx",“userId”=”uuid"
Displayed on the web
interface
Client [{userName||IP||clientMac}] failed to join WLAN [{ssid}] from AP
[{apName&&apMac}] due to authentication failure.
Description This event occurs when the client fails to join WLAN on the AP due to an
authentication failure.
Client joined
TABLE 341 Client joined event
Event Client joined
Event Type clientJoin
Event Code 202
Severity Informational
Attribute “apMac”=”xx:xx:xx:xx:xx:xx”, “clientMac”=”xx:xx:xx:xx:xx:xx”,
“ssid”=”xxxxx”, “wlanId”=”xxxxx”, “userName”=”xxxxx”,
“clientIP”=”x.x.x.x”, “userId”=”uuid"
Displayed on the web
interface
Client [{userName||IP||clientMac}] joined WLAN [{ssid}] from AP
[{apName&&apMac}].
Description This event occurs when the client session joins the WLAN on AP.
Client failed to join
TABLE 342 Client failed to join event
Event Client failed to join
Event Type clientJoinFailure
Event Code 203
Severity Informational
Attribute “apMac”=”xx:xx:xx:xx:xx:xx”, “clientMac”=”xx:xx:xx:xx:xx:xx”,
“ssid”=”xxxxx”, “wlanId”=”xxxxx”, “userName”=”xxxxx”
“userId”=”uuid"
Displayed on the web
interface
Client [{userName||IP||clientMac}] failed to join WLAN [{ssid}] from AP
[{apName&&apMac}].
Description This event occurs when the client fails to connect to the WLAN on the AP.
Events Types
Client Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A 205