Ruckus Wireless Virtual SmartZone High Scale User Manual

TABLE 549 Restore data failed event (continued)
Event Restore data failed
Displayed on the web
interface
MAP-RestoreData Operation Failed for IMSI [{ueImsi}] with [{hlrInstance}], cause
[{cause}]
Description This event occurs when it fails to restore the data operation.
NOTE
Refer to GR Interface Alarms on page 103.
IPMI Events
NOTE
This section is not applicable for vSZ-H.
Following are the events related to IPMIs.
Event
Event Event
ipmiVoltage on page 277 ipmiThempBB on page 278 ipmiThempFP on page 278
ipmiThempIOH on page 278 ipmiThempMemP on page 279 ipmiThempPS on page 279
ipmiThempP on page 279 ipmiThempHSBP on page 280 ipmiFan on page 280
ipmiPower on page 280 ipmiCurrent on page 281 ipmiFanStatus on page 281
ipmiPsStatus on page 281 ipmiDrvStatus on page 282 ipmiREVotage on page 282
ipmiREThempBB on page 282 ipmiREThempFP on page 283 ipmiREThempIOH on page 283
ipmiREThempMemP on page 283 ipmiREThempPS on page 283 ipmiREThempP on page 284
ipmiREThempHSBP on page 284 ipmiREFan on page 284 ipmiREPower on page 285
ipmiREPower on page 285 ipmiREFanStatus on page 285 ipmiREPsStatus on page 286
ipmiREDrvStatus on page 286
ipmiVoltage
TABLE 550 ipmiVoltage event
Event ipmiVoltage
Event Type ipmiVoltage
Event Code 901
Severity Major
Attribute "id"="x", "status"="xxxxx", "nodeMac"="xx:xx:xx:xx:xx:xx"
Displayed on the web
interface
Baseboard voltage [{status}] on control plane [{nodeMac}]
Description This event occurs due to under /over voltage on the control plane. Baseboard
threshold temperatures are:
Critical high - 66
0
C
Non critical high - 61
0
C
Non critical low - 10
0
C
Critical low - 5
0
C
Events Types
IPMI Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A 277

Ruckus Wireless Virtual SmartZone High Scale Specifications

General

Brand	Ruckus Wireless
Model	Virtual SmartZone High Scale
Category	Gateway
Language	English