GGSN restarted
TABLE 84 GGSN restarted alarms
Alarm GGSN restarted
Alarm Type ggsnRestarted
Alarm Code 1210
Severity Major
Aggregation Policy From the event code 1210 an alarm is raised for every event. A single event
triggers a single alarm.
Attribute “mvnoId”=”12”, “ctrlBladeMac”=”aa:bb:cc:dd:ee:ff”,
“srcProcess”=”sm”, “realm”=”NA”, “gtpcIp”=”5.5.5.5”,
"ggsnIp"="10.10.10.10", "SCGMgmtIp"="2.2.2.2",
Displayed on the web
interface
GGSN [{ggsnIp}] connected to {produce.short.name} [{SCGMgmtIp}] (GTPC-IP
[{gtpcIp}]) is restarted.
Description This alarm is triggered when the GTP control plane (GTP-C) receives a new
recovery value.
Recommended Actions Refer to the log file for Gateway GPRS Support Node (GGSN) restart.
GGSN not reachable
TABLE 85 GGSN not reachable alarms
Alarm GGSN not reachable
Alarm Type ggsnNotReachable
Alarm Code 1211
Severity Major
Aggregation Policy From the event code 1211 an alarm is raised for every event. A single event
triggers a single alarm.
Attribute “mvnoId”=”12”, “ctrlBladeMac”=”aa:bb:cc:dd:ee:ff”,
“srcProcess”=”sm”, “realm”=”NA”,
“gtpcIp”=”5.5.5.5”, "ggsnIp"="10.10.10.10",
"SCGMgmtIp"="2.2.2.2",
Displayed on the web
interface
GGSN [{ggsnIp}] connected to {produce.short.name} (GTPC-IP [{gtpcIp}]) is not
reachable
Description This alarm is triggered when the echo request is timed out.
Recommended Actions Refer to the log file.
GGSN not resolved
TABLE 86 GGSN not resolved alarm
Alarm GGSN not resolved
Alarm Type ggsnNotResolved
Alarm Code 1215
Severity Major
Alarm Types
Gn/S2a Interface Alarms
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
98 Part Number: 800-71565-001 Rev A
To Next Page
Loading...
