Ruckus Wireless Virtual SmartZone High Scale User Manual

Zone configuration preparation failed
TABLE 452 Zone configuration preparation failed event
Event Zone configuration preparation failed
Event Type zoneCfgPrepareFailed
Event Code 1021
Severity Major
Attribute "nodeMac"="50:A7:33:24:E7:90","zoneName"="openZone"
Displayed on the web
interface
Failed to prepare zone [{zoneName}] configuration required by ap configuration
generation
Description This event occurs when the controller is unable to prepare a zone configuration
required by the AP.
AP configuration generation failed
TABLE 453 AP configuration generation failed event
Event AP configuration generation failed
Event Type apCfgGenFailed
Event Code 1022
Severity Major
Attribute "nodeMac"="50:A7:33:24:E7:90","zoneName"="openZone",
"apCfgGenFailedCount"="25"
Displayed on the web
interface
Failed to generate configuration for [{apCfgGenFailedCount}] AP(s) under
zone[{zoneName}].
Description This event occurs when the controller fails to generate the AP configuration under
a particular zone.
End-of-life AP model detected
TABLE 454 End-of-life AP model detected event
Event End-of-life AP model detected
Event Type cfgGenSkippedDueToEolAp
Event Code 1023
Severity Major
Attribute “nodeMac”="50:A7:33:24:E7:90","zoneName"="openZone","model"="R300,T30
0"
Displayed on the web
interface
Detected usage of end-of-life ap model(s)[{model}] while generating configuration
for AP(s) under zone[{zoneName}].
Description This event occurs when the controller detects the AP model’s end-of-life under a
certain zone.
NOTE
Refer to Configuration Alarms on page 87.
Events Types
Configuration Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
242 Part Number: 800-71565-001 Rev A

Ruckus Wireless Virtual SmartZone High Scale Specifications

General

Brand	Ruckus Wireless
Model	Virtual SmartZone High Scale
Category	Gateway
Language	English