Ruckus Wireless Virtual SmartZone High Scale User Manual

TABLE 423 Cluster add AP firmware started event (continued)
Event Cluster add AP firmware started
Attribute "clusterName"="xxx"
Displayed on the web
interface
Starting add AP firmware in cluster [{clusterName}]
Description This event occurs when the cluster add process to the AP firmware process
starts.
Cluster add AP firmware completed
TABLE 424 Cluster add AP firmware completed event
Event Cluster add AP firmware completed
Event Type clusterAddAPFirmwareSuccess
Event Code 852
Severity Informational
Attribute "clusterName"="xxx"
Displayed on the web
interface
Starting add AP firmware in cluster [{clusterName}]
Description This event occurs when the cluster add process to the AP firmware is successful.
Cluster add AP firmware failed
TABLE 425 Cluster add AP firmware failed event
Event Cluster add AP firmware failed
Event Type clusterAddAPFirmwareFailed
Event Code 853
Severity Major
Attribute "reason"="xxx”, "clusterName"="xxx"
Displayed on the web
interface
Cluster [{clusterName}] add AP firmware failed. Reason:[{reason}].
Description This event occurs when the cluster add process to the AP firmware fails.
Cluster name is changed
TABLE 426 Cluster name is changed event
Event Cluster name is changed
Event Type clusterNameChanged
Event Code 854
Severity Major
Attribute "clusterName"="xxx"
Displayed on the web
interface
Cluster name is changed to [{clusterName}]
Description This event occurs when the cluster node name is modified. By enabling email and
SNMP notification in the controller user interface (Configuration > System >
Events Types
Cluster Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A 233

Ruckus Wireless Virtual SmartZone High Scale Specifications

General

Brand	Ruckus Wireless
Model	Virtual SmartZone High Scale
Category	Gateway
Language	English