Ruckus Wireless Virtual SmartZone High Scale - Cluster Upload Vsz-D Firmware Started; Cluster Upload Vsz-D Firmware Completed; Cluster Upload Vsz-D Firmware Failed

NOTE
Events 845, 846 and 847 are not applicable for SCG.
Cluster upload vSZ-D firmware started
TABLE 417 Cluster upload vSZ-D firmware started event
Event Cluster upload vSZ-D firmware started
Event Type clusterUploadVDPFirmwareStart
Event Code 845
Severity Informational
Attribute "clusterName"="xx"
Displayed on the web
interface
Starting upload vSZ-D firmware in cluster [{clusterName}]
Description This event occurs when the cluster starts and uploads vSZ-data plane firmware.
Cluster upload vSZ-D firmware completed
TABLE 418 Cluster upload vSZ-D firmware completed event
Event Cluster upload vSZ-D firmware completed
Event Type uploadClusterVDPFirmwareSuccess
Event Code 846
Severity Informational
Attribute "clusterName"="xxx" "status"="StartTime:yyyy-MM-dd hh:mm:ss, EndTime:yyyy-
MM-dd hh:mm:ss, Duration:hh:mm:ss"
Displayed on the web
interface
Cluster [{clusterName}] upload vSZ-D firmware completed. [{status}]
Description This event occurs when the cluster upload process of vSZ-data plane firmware is
successful.
Cluster upload vSZ-D firmware failed
TABLE 419 Cluster upload vSZ-D firmware failed event
Event Cluster upload vSZ-D firmware failed
Event Type uploadClusterVDPFirmwareFailed
Event Code 847
Severity Informational
Attribute "reason"="xxx", "clusterName"="xxx"
Displayed on the web
interface
Cluster [{clusterName}] upload vSZ-D firmware failed. Reason:[{reason}].
Description This event occurs when the cluster upload process of vSZ-data plane firmware
fails.
Events Types
Cluster Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A 231