EasyManua.ls Logo

Ruckus Wireless Virtual SmartZone High Scale - RADIUS Fails to Authenticate with AD NPS Server; Successfully Established the TLS Tunnel with AD;LDAP; Fails to Establish TLS Tunnel with AD;LDAP

Ruckus Wireless Virtual SmartZone High Scale
341 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RADIUS fails to authenticate with AD NPS server
TABLE 320 RADIUS fails to authenticate with AD NPS server event
Event RADIUS fails to authenticate with AD NPS server
Event Type racADNPSFailToAuthenticate
Event Code 1756
Severity Major
Attribute “ctrlBladeMac”=”aa:bb:cc:dd:ee:ff”, “mvnoId”=12, “srcProcess”=”RAC”,
“authSrvrIp”=“1.1.1.1”, “username”=“testuser’
"SCGMgmtIp"="2.2.2.2", “desc”=”Fails to authenticate with AD NPS”
Displayed on the web
interface
[{srcProcess}] Fails to authenticate AD NPS[{authSrvrIp}] on SCG [{SCGMgmtIp}]
for User[{userName}]
Description This event occurs when RADIUS fails to authenticate with AD NPS server.
NOTE
Refer to Authentication Alarms on page 72.
Successfully established the TLS tunnel with AD/LDAP
TABLE 321 Successfully established the TLS tunnel with AD/LDAP event
Event Successfully established the TLS tunnel with AD/LDAP
Event Type racADNPSFailToAuthenticate
Event Code 1761
Severity Debug
Attribute "ctrlBladeMac"="aa:bb:cc:dd:ee:ff", "mvnoId"=12, "srcProcess"="radiusd",
"authSrvrIp"="1.1.1.1", "authSrvrPort"="636" "SCGMgmtIp"="2.2.2.2",
"desc"="Successfully established TLS Tunnel with LDAP/AD"
Displayed on the web
interface
[{srcProcess}] Established the TLS connection with AD/LDAP[{authSrvrIp}]
successfully from SCG[{SCGMgmtIp}]
Description This event occurs when the TLS connection between the controller and AD/LDAP
is successfully established.
Fails to establish TLS tunnel with AD/LDAP
TABLE 322 Fails to establish TLS tunnel with AD/LDAP event
Event Fails to establish TLS tunnel with AD/LDAP
Event Type racADLDAPTLSFailed
Event Code 1762
Severity Major
Attribute “ctrlBladeMac”=”aa:bb:cc:dd:ee:ff”, “mvnoId”=12 “srcProcess”=”radiusd”,
“authSrvrIp”=“1.1.1.1” “authSrvrPort”=“636”, “SCGMgmtIp“="2.2.2.2"
“desc”=”Fails to establish TLS Tunnel with LDAP/AD”
Displayed on the web
interface
[{srcProcess}] Establishes the TLS connection with AD/LDAP[{authSrvrIp}] fails
from SCG[{SCGMgmtIp}]
Description This event occurs when the TLS connection between the controller and AD/LDAP
fails.
Events Types
Authentication Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
196 Part Number: 800-71565-001 Rev A

Table of Contents

Related product manuals