TABLE 160 Memory allocation failed alarm (continued)
Alarm Memory allocation failed
Severity Critical
Aggregation Policy From the event code 5003 an alarm is raised for every event. A single event
triggers a single alarm.
Attribute “ctrlBladeMac”=”aa:bb:cc:dd:ee:ff”, "SCGMgmtIp"="2.2.2.2"
Displayed on the web
interface
Insufficient Heap Memory in PMIPv6 process at {produce.short.name}
[{SCGMgmtIp}]
Description This alarm is logged when the memory allocation fails in the PMIPv6 process.
Recommended Actions Check the PMIPv6d application log and status from the controller web interface.
NOTE
Refer to System Alarms on page 123.
The last one data plane is disconnected zone affinity profile alarm
TABLE 161 The last one data plane is disconnected zone affinity profile alarm
Alarm The last one data plane is disconnected zone affinity profile
Alarm Type zoneAffinityLastDpDisconnected
Alarm Code 1267
Severity Informational
Aggregation Policy From the event code 1267 an alarm is raised for every event. A single event
triggers a single alarm.
Attribute “dpName="xxxxxxxx",“dpKey”=“xx:xx:xx:xx:xx:xx”,
"zoneAffinityProfileId"="xxxxxxxx"
Displayed on the web
interface
The Last one Data Plane[{dpName&&dpKey}] is disconnected Zone Affinity
profile[{zoneAffinityProfileId}].
Description This alarm is logged when the last data plane is disconnected from the zone
affinity.
Recommended Actions
NOTE
Refer to System Events on page 303.
Threshold Alarms
Following are the alarms related to threshold system set.
• CPU threshold exceeded on page 136
• Memory threshold exceeded on page 136
• Disk usage threshold exceeded on page 137
• License threshold exceeded on page 137
• Rate limit for TOR surpassed on page 137
• The number of users exceeded its limit on page 138
• The number of devices exceeded its limit on page 138
Alarm Types
Threshold Alarms
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A 135