EasyManuals Logo

Ruckus Wireless Virtual SmartZone High Scale User Manual

Ruckus Wireless Virtual SmartZone High Scale
341 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #244 background imageLoading...
Page #244 background image
Event Event Event
Data plane IP address updated on page 246 Data plane updated to a new control plane on
page 246
Data plane status update failed on page 246
Data plane statistics update failed on page 247 Data plane connected on page 247 Data plane disconnected on page 247
Data plane physical interface down on page 247 Data plane physical interface up on page 248 Data plane packet pool is under low water mark
on page 248
Data plane packet pool is under critical low water
mark on page 248
Data plane packet pool is above high water mark
on page 249
Data plane core dead on page 249
Data plane process restarted on page 249 Data plane discovery succeeded on page 250 Data plane managed on page 250
Data plane deleted on page 250 Data plane license is not enough on page 251 Data plane upgrade started on page 251
Data plane upgrading on page 251 Data plane upgrade succeeded on page 251 Data plane upgrade failed on page 252
Data plane of data center side successfully
connects to the CALEA server on page 252
Data plane of data center side fails to connect to
the CALEA server on page 252
Data Plane of data center side disconnects to
CALEA server on page 253
Data plane successfully connects to the other
data plane on page 253
Data plane fails to connect to the other data
plane on page 254
Data plane disconnects to the other data plane
on page 254
Start CALEA mirroring client in data plane on
page 254
Stop CALEA mirroring client in data plane on
page 255
Data plane DHCP IP pool usage rate is 100
percent on page 255
Data plane DHCP IP pool usage rate is 80
percent on page 255
Data plane discovered
TABLE 457 Data plane discovered event
Event Data plane discovered
Event Type dpDiscoverySuccess (server side detect)
Event Code 501
Severity Informational
Attribute “dpKey”=”xx:xx:xx:xx:xx:xx”, “wsgIP"=”xxx.xxx.xxx.xxx”
Displayed on the web
interface
Data plane [{dpName||dpKey}] sent a connection request to
{produce.short.name} [{cpName||wsgIP}].
Description This event occurs when the data plane successfully connects to the controller.
Data plane discovery failed
TABLE 458 Data plane discovery failed event
Event Data plane discovery failed
Event Type dpDiscoveryFail (detected on the server side)
Event Code 502
Severity Informational
Attribute “dpKey”=”xx:xx:xx:xx:xx:xx”, “wsgIP"=”xxx.xxx.xxx.xxx”
Displayed on the web
interface
Data plane [{dpName||dpKey}] failed to send a discovery request to
{produce.short.name} [{cpName||wsgIP}].
Description This event occurs when the data plane fails to connect to the controller.
Events Types
Data Plane Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
244 Part Number: 800-71565-001 Rev A

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ruckus Wireless Virtual SmartZone High Scale and is the answer not in the manual?

Ruckus Wireless Virtual SmartZone High Scale Specifications

General IconGeneral
BrandRuckus Wireless
ModelVirtual SmartZone High Scale
CategoryGateway
LanguageEnglish

Related product manuals