TABLE 345 Client authorization successfully event (continued)
Event Client authorization successfully
Attribute ""apMac"="xx:xx:xx:xx:xx:xx", "clientMac"="xx:xx:xx:xx:xx:xx",
“ssid”=”xxxxx”, “wlanId”=”xxxxx”, “userName”=”xxxxx”,
“clientIP”=”x.x.x.x”, “userId”=”uuid"
Displayed on the web
interface
Client [{userName||IP||clientMac}] of WLAN [{ssid}] from AP [{apName&&apMac}]
was authorized.
Description This event occurs when the client on WLAN AP is authorized.
Client authorization failed
TABLE 346 Client authorization failed event
Event Client authorization failed
Event Type clientAuthorizationFailure
Event Code 207
Severity Informational
Attribute “apMac”=”xx:xx:xx:xx:xx:xx”, “clientMac”=”xx:xx:xx:xx:xx:xx”,
“ssid”=”xxxxx”, “wlanId”=”xxxxx”, “userName”=”xxxxx”,
“clientIP”=”x.x.x.x” “userId”=”uuid"
Displayed on the web
interface
Client [{userName||IP||clientMac}] of WLAN [{ssid}] from AP [{apName&&apMac}]
was not authorized.
Description This event occurs when the client on WLAN AP authorization fails.
Client session expired
TABLE 347 Client session expired event
Event Client session expired
Event Type clientSessionExpiration
Event Code 208
Severity Informational
Attribute “apMac"="xx:xx:xx:xx:xx:xx", "clientMac"="xx:xx:xx:xx:xx:xx", “ssid”=”xxxxx”,
“assoicationTime"="600", “wlanId”=”xxxxx”, “userName”=”xxxxx”,
“clientIP”=”x.x.x.x”,“apName”=””, “apLocation”=””,“username”=””, “osType”=””,
“radio”=””,“vlanId”="", “sessionDuration”="", “txBytes”=””, “rxBytes”=””, “rssi”=””,
“receivedSignalStrength”=””, “apGps”=””, “hostname”=””, “encryption”=””,
“disconnectReason”=””, “bssid”=”” “userId”=”uuid"
Displayed on the web
interface
Client [{userName||IP||clientMac}] exceeded the session time limit. Session
terminated.
Description This event occurs when the client exceeds the session time limit resulting in a
session termination.
Events Types
Client Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A 207