Ruckus Wireless Virtual SmartZone High Scale User Manual

TABLE 229 AP failed to connect to LS event (continued)
Event AP failed to connect to LS
Event Code 704
Severity Major
Attribute "apMac"="xx:xx:xx:xx:xx:xx", “url”=””, “port”=””
Displayed on the web
interface
AP [{apName&&apMac}] connection failed to LS: url= [{url}], port= [{port}]
Description This event occurs when the AP fails to connect to the location based service.
Auto Clearance This event triggers the alarm 704, which is auto cleared by the event code 703.
AP started location service
TABLE 230 AP started location service event
Event AP started location service
Event Type apLBSStartLocationService
Event Code 705
Severity Informational
Attribute "apMac”=”xx:xx:xx:xx:xx:xx”, "venue"=""
Displayed on the web
interface
AP [{apName&&apMac}] Start Ruckus Location Service: venue= [{venue}], band=
[{band}]
Description This event occurs when the AP starts to get the location data.
AP stopped location service
TABLE 231 AP stopped location service event
Event AP stopped location service
Event Type apLBSStopLocationService
Event Code 706
Severity Informational
Attribute "apMac”=”xx:xx:xx:xx:xx:xx”, "venue"=""
Displayed on the web
interface
AP [{apName&&apMac}] Stop Ruckus Location Service: venue= [{venue}], band=
[{band}]
Description This event occurs when the AP stops getting the location data.
AP received passive calibration request
TABLE 232 AP received passive calibration request event
Event AP received passive calibration request
Event Type apLBSRcvdPassiveCalReq
Event Code 707
Severity Informational
Attribute “apMac”=”xx:xx:xx:xx:xx:xx”, “venue”=””, “interval”=””, “duration, =””, “band”=””,
“count”=””
Events Types
AP LBS Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
164 Part Number: 800-71565-001 Rev A

Ruckus Wireless Virtual SmartZone High Scale Specifications

General

Brand	Ruckus Wireless
Model	Virtual SmartZone High Scale
Category	Gateway
Language	English