TABLE 676 Diameter CEA unknown peer event (continued)
Event Diameter CEA unknown peer
Displayed on the web
interface
[{srcProcess}] CEA received from Unknown Peer [{peerName}] Realm
[{peerRealmName}] on {produce.short.name} [{SCGMgmtIp}]
Description This event occurs due when the capabilities exchange answer (CEA) is received
from an unknown peer.
Diameter no common application
NOTE
This event is not applicable for vSZ-H.
TABLE 677 Diameter no common application event
Event Diameter no common application
Event Type diaNoCommonApp
Event Code 1415
Severity Critical
Attribute
“ctrlBladeMac”=”aa:bb:cc:dd:ee:ff” “mvnoId”=12 “sr
cProcess”=”<Application
Name>” “realm”=”ruckus.com" “originHost” = “Node1” "SCGMgmtIp"="2.2.2.2"
“peerName”=ÖCS1 “peerRealmName” = “organization.com”“desc” = “No
common App with peer”
Displayed on the web
interface
[{srcProcess}] No common App with Peer [{peerName}] Realm
[{peerRealmName}] on {produce.short.name} [{SCGMgmtIp}]
Description This event occurs when the common application is not with the peer.
ZD AP migrating
TABLE 678 ZD AP migrating event
Event ZD AP migrating
Event Type zdAPMigrating
Event Code 2001
Severity Informational
Attribute “apMac”=“ C0:C5:20:12:2B:2C “, “serialNumber”=“501003003033”,
“model”=“ZF7962”, “firmware”=“3.0.0.0.0”
Displayed on the web
interface
ZD-AP [{apMac}] / [{serialNumber}] model [{model}] is upgrading with
{produce.short.name} AP firmware version - [{firmware}]
Description This event occurs when a ZoneDirector AP is upgrading with the controller AP
firmware image.
ZD AP migrated
TABLE 679 ZD AP migrated event
Event ZD AP migrated
Event Type zdAPMigrated
Event Code 2002
Severity Informational
Events Types
System Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A 323
To Next Page
Loading...
Need help?
General
