Ruckus Wireless Virtual SmartZone High Scale User Manual

AP cable modem interface up
TABLE 277 AP cable modem interface up event
Event AP cable modem interface up
Event Type cableModemUp
Event Code 325
Severity Informational
Attribute "apMac"="xx:xx:xx:xx:xx:xx"
Displayed on the web
interface
AP [{apName&&apMac}] cable modem interface is up.
Description This event occurs when the AP cable modem interface is up.
AP cable modem soft-rebooted by user
TABLE 278 AP cable modem soft-rebooted by user event
Event AP cable modem soft-rebooted by user
Event Type cmResetByUser
Event Code 326
Severity Informational
Attribute ”apMac”=“xx:xx:xx:xx:xx:xx”,”reason”=“xxxxx”
Displayed on the web
interface
AP [{apName&&apMac}] cable modem soft-reboot because of [{reason}].
Description This event occurs when the AP cable modem is softly rebooted because the user
executes the soft-reboot CLI command.
AP cable modem set to factory default by user
TABLE 279 AP cable modem set to factory default by user event
Event AP cable modem set to factory default by user
Event Type cmResetFactoryByUser
Event Code 327
Severity Informational
Attribute ”apMac”=“xx:xx:xx:xx:xx:xx”,”reason”=“xxxxx”
Displayed on the web
interface
AP [{apName&&apMac}] cable modem set to factory default because of
[{reason}].
Description This event occurs when AP cable modem is reset to factory default because the
user executes the set factory command line interface (CLI) command.
NOTE
Refer to AP State Change Alarms on page 69.
Events Types
AP State Change Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
180 Part Number: 800-71565-001 Rev A

Ruckus Wireless Virtual SmartZone High Scale Specifications

General

Brand	Ruckus Wireless
Model	Virtual SmartZone High Scale
Category	Gateway
Language	English