AP health high client count flag
TABLE 283 AP health high client count flag event
Event AP health high client count flag
Event Type apHealthClientCountFlag
Event Code 331
Severity Warning
Attribute "apName"="xxxxx", "apMac"="xx:xx:xx:xx:xx:xx", "current V
alue"="xxxxx","configuredThreshold"="xxxxx",
Displayed on the web
interface
AP [{apName&&apMac}] flagged client count health [{currentValue}] because it
crossed the threshold [{configuredThreshold}].
Description This event occurs when an AP is flagged because the AP has crossed the client
count health threshold configured by the administrator.
AP health high latency clear
TABLE 284 AP health high latency clear event
Event AP health high latency clear
Event Type apHealthLatencyClear
Event Code 332
Severity Informational
Attribute "apName"="xxxxx", "apMac"="xx:xx:xx:xx:xx:xx", "current V
alue"="xxxxx","configuredThreshold"="xxxxx", " radio" = "X.XG",
Displayed on the web
interface
AP [{apName&&apMac}] cleared {{radio}} latency health [{currentValue}], which is
no longer past the threshold [{configuredThreshold}].
Description This event occurs when an AP health flag is cleared because it is no longer past
the capacity threshold configured by the administrator.
AP health low capacity clear
TABLE 285 AP health low capacity clear event
Event AP health low capacity clear
Event Type apHealthCapacityClear
Event Code 333
Severity Informational
Attribute "apName"="xxxxx", "apMac"="xx:xx:xx:xx:xx:xx", "current V
alue"="xxxxx","configuredThreshold"="xxxxx", " radio" = "X.XG"
Displayed on the web
interface
AP [{apName&&apMac}] cleared {{radio}} capacity health [{currentValue}], which
is no longer past the threshold [{configuredThreshold}].
Description This event occurs when an AP's health flag is cleared because it is no longer past
the capacity threshold configured by the administrator.
Events Types
AP State Change Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
182 Part Number: 800-71565-001 Rev A