Ruckus Wireless Virtual SmartZone High Scale - HIP Started; HIP Stopped; HIP Failed over

HIP started
NOTE
This event is not applicable for vSZ-H.
TABLE 657 HIP started event
Event HIP started
Event Type hipStarted
Event Code 1014
Severity Informational
Attribute “ctrlBladeMac"="50:A7:33:24:E7:90", "srcProcess"="HIP", "realm"="NA",
"processName"="HIP”, "SCGMgmtIp"="100.13.0.102"
Displayed on the web
interface
[{srcProcess}] process gets Started on {produce.short.name} [{SCGMgmtIp}]
Description This event occurs when the HIP instance starts.
HIP stopped
NOTE
This event is not applicable for vSZ-H.
TABLE 658 HIP stopped event
Event HIP stopped
Event Type hipStopped
Event Code 1015
Severity Informational
Attribute “ctrlBladeMac"="50:A7:33:24:E7:90", "srcProcess"="HIP", "realm"="NA",
"processName"="HIP", "SCGMgmtIp"="100.13.0.102”
Displayed on the web
interface
[{srcProcess}] process stopped HIP on {produce.short.name} [{SCGMgmtIp}]
Description This event occurs when HIP is stopped.
HIP failed over
NOTE
This event is not applicable for vSZ-H.
TABLE 659 HIP failed over event
Event HIP failed over
Event Type hipFailover
Event Code 1016
Severity Major
Attribute "ctrlBladeMac"="50:A7:33:24:E7:90", "srcProcess"="HIP", "realm"="NA",
"processName"="HIP", "SCGMgmtIp"="100.13.0.102"
Displayed on the web
interface
[{srcProcess}] Node transitioned to Active on {produce.short.name}
[{SCGMgmtIp}]
Events Types
System Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A 315