TABLE 384 Node removal failed event (continued)
Event Node removal failed
Event Code 805
Severity Major
Attribute “clusterName”=”xxx”, “nodeName”=”xxx”,
“nodeMac”=” xx:xx:xx:xx:xx:xx”
Displayed on the web
interface
Node [{nodeName}] failed to remove from cluster [{clusterName}].
Description This event occurs when a node cannot be removed from the cluster.
Auto Clearance This event triggers the alarm 802, which is auto cleared by the event code 804.
Node out of service
TABLE 385 Node out of service event
Event Node out of service
Event Type nodeOutOfService
Event Code 806
Severity Critical
Attribute “clusterName”=”xxx”, “nodeName”=”xxx”,
“nodeMac”=” xx:xx:xx:xx:xx:xx”
Displayed on the web
interface
Node [{nodeName}] in cluster [{clusterName}] is out of service. Reason:[{reason}].
Description This event occurs when a node is out of service.
Auto Clearance This event triggers the alarm 803, which is auto cleared by the event code 835.
Cluster in maintenance state
TABLE 386 Cluster in maintenance state event
Event Cluster in maintenance state
Event Type clusterInMaintenanceState
Event Code 807
Severity Critical
Attribute “clusterName”=”xxx”
Displayed on the web
interface
[{clusterName}] is in maintenance state
Description This event occurs when a node is in a maintenance state.
Auto Clearance This event triggers the alarm 804, which is auto cleared by the event code 808.
Cluster back in service
TABLE 387 Cluster back in service event
Event Cluster back in service
Event Type clusterBackToInService
Events Types
Cluster Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A 221
To Next Page
Loading...
Need help?
General
