Ruckus Wireless Virtual SmartZone High Scale User Manual

AP secure gateway association failure
TABLE 171 AP secure gateway association failure alarm
Alarm AP secure gateway association failure
Alarm Type ipsecTunnelAssociateFailed
Alarm Code 662
Severity Major
Aggregation Policy From the event code 662 an alarm is raised for every event. A single event
triggers a single alarm.
Auto Clearance The alarm code is auto cleared with the event code 660
Attribute apMac="xx:xx:xx:xx:xx:xx","ipsecGWAddress"="x.x.x.x"
Displayed on the web
interface
AP [{apName&&apMac}] is unable to establish secure gateway with
[{ipsecGWAddress}
Description This alarm is triggered when the AP is unable to connect to the secure gateway.
Recommended Actions No action required.
NOTE
Refer to Tunnel Events - Access Point (AP) on page 331.
Alarm Types
Tunnel Alarms - Access Point
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
140 Part Number: 800-71565-001 Rev A

Ruckus Wireless Virtual SmartZone High Scale Specifications

General

Category	Gateway
Maximum Sites	10, 000
Virtualization Support	Yes
High Availability	Yes
Scalability	High
Supported Hypervisors	VMware ESXi, KVM
Management Interface	CLI, REST API
Security Features	Rogue AP detection
Supported Protocols	DHCP, SNMP, RADIUS