AP smart monitor turn off WLAN
TABLE 271 AP smart monitor turn off WLAN event
Event AP smart monitor turn off WLAN
Event Type smartMonitorTurnOffWLAN
Event Code 319
Severity Warning
Attribute "apMac"="xx:xx:xx:xx:xx:xx", "turnOffTime"="" , "turnOnTime"=""
Displayed on the web
interface
AP [{apName&&apMac}] turned off WLANs by Smart Monitor on
[{time(turnOffTime)}] and turn on WLANs on [{time(turnOnTime)}]
Description This event occurs when the smart monitor of the AP turns off the WLAN.
AP client load balancing limit reached
TABLE 272 AP client load balancing limit reached event
Event AP client load balancing limit reached
Event Type apCLBlimitReached
Event Code 320
Severity Warning
Attribute "apMac"="xx:xx:xx:xx:xx:xx", "bssid"="xx:xx:xx:xx:xx:xx", "clb-load-limit"="", "cur-
load"="", "min-clbpartner-bssid"="", "min-clbpartner-load"="", "num-
clbpartners"="", "low-clbpartners"=""
Displayed on the web
interface
AP [{apname@apMac}] reached client load limit, [{cur-load}] / [{clb-load-limit}], on
WLAN [{ssid}]
Description This event occurs when the AP reaches the client loading balance (CLB) limit. The
adjacent threshold limit value is 50 for 2.4GHz radio and 43 for 5GHz radio.
AP client load balancing limit recovered
TABLE 273 AP client load balancing limit recovered event
Event AP client load balancing limit recovered
Event Type apCLBlimitRecovered
Event Code 321
Severity Informational
Attribute "apMac"="xx:xx:xx:xx:xx:xx", "bssid"="xx:xx:xx:xx:xx:xx", "clb-load-limit"="", "cur-
load"="",
Displayed on the web
interface
AP[{apname@apMac}] recovered from client load limit, [{cur-load}] / [{clb-load-
limit}], on WLAN [{ssid}]
Description This event occurs when the AP is recovered from client load balance (CLB) limit.
The adjacent threshold limit value is 50 for 2.4GHz radio and 43 for 5GHz radio.
Events Types
AP State Change Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
178 Part Number: 800-71565-001 Rev A