Ruckus Wireless Virtual SmartZone High Scale User Manual

Event Event Event
Cluster in maintenance state on page 221 Cluster back in service on page 221 Cluster backup completed on page 222
Cluster backup failed on page 222 Cluster restore completed on page 222 Cluster restore failed on page 223
Cluster node upgrade completed on page 223 Entire cluster upgraded successfully on page 223 Cluster upgrade failed on page 224
Cluster application stopped on page 224 Cluster application started on page 224 Cluster backup started on page 225
Cluster upgrade started on page 225 Cluster leader changed on page 225 Node bond interface down on page 225
Node bond interface up on page 226 Node IP address changed on page 226 Node physical interface down on page 226
Node physical interface up on page 227 Cluster node rebooted on page 227 NTP time synchronized on page 227
Cluster node shutdown on page 228 Cluster upload started on page 228 Cluster upload completed on page 228
Cluster upload failed on page 228 SSH tunnel switched on page 229 Cluster remove node started on page 229
Node back in service on page 229 Disk usage exceed threshold on page 230 Cluster out of service on page 230
Initiated moving APs in node to a new cluster on
page 230
Cluster upload vSZ-D firmware started on page
231
Cluster upload vSZ-D firmware completed on
page 231
Cluster upload vSZ-D firmware failed on page
231
Cluster upload AP firmware started on page 232 Cluster upload AP firmware completed on page
232
Cluster upload AP firmware failed on page 232 Cluster add AP firmware started on page 232 Cluster add AP firmware completed on page 233
Cluster add AP firmware failed on page 233 Cluster name is changed on page 233 Unsync NTP Time on page 234
Cluster upload KSP file started on page 234 Cluster upload KSP file completed on page 234 Cluster upload KSP file failed on page 235
Configuration backup started on page 235 Configuration backup succeeded on page 235 Configuration backup failed on page 235
Configuration restore succeeded on page 236 Configuration restore failed on page 236 AP Certificate Expired on page 236
AP Certificate Updated on page 237 Configuration restore started on page 237 Upgrade SSTable failed on page 237
Reindex elastic search finished on page 238 Initiated APs contact APR on page 238 All nodes back in service on page 238
Not management service ready on page 238 Management service ready on page 239 Configuration sync failed on page 239
Node IPv6 address deleted on page 240 Node IPv6 address added on page 239
Cluster created successfully
TABLE 380 Cluster created successfully event
Event Cluster created successfully
Event Type clusterCreatedSuccess
Event Code 801
Severity Informational
Attribute “clusterName”=”xxx”, “nodeName”=”xxx”,
“nodeMac”=” xx:xx:xx:xx:xx:xx”
Displayed on the web
interface
Cluster [{clusterName}] created with node [{nodeName}]
Description This event occurs when a cluster and a node are created.
New node joined successfully
TABLE 381 New node joined successfully event
Event New node joined successfully
Event Type newNodeJoinSuccess
Events Types
Cluster Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A 219

Ruckus Wireless Virtual SmartZone High Scale Specifications

General

Brand	Ruckus Wireless
Model	Virtual SmartZone High Scale
Category	Gateway
Language	English