AP health high latency flag
TABLE 280 AP health high latency flag event
Event AP health high latency flag
Event Type apHealthLatencyFlag
Event Code 328
Severity Warning
Attribute "apName"="xxxxx", "apMac"="xx:xx:xx:xx:xx:xx", "current V
alue"="xxxxx","configuredThreshold"="xxxxx", " radio" = "X.XG"
Displayed on the web
interface
AP [{apName&&apMac}] flagged {{radio}} latency health [{currentValue}] because
it crossed the threshold [{configuredThreshold}].
Description This event occurs when the AP is flagged because the radio has crossed the
latency health threshold configured by the administrator.
AP health low capacity flag
TABLE 281 AP health low capacity flag event
Event AP health low capacity flag
Event Type apHealthCapacityFlag
Event Code 329
Severity Warning
Attribute "apName"="xxxxx", "apMac"="xx:xx:xx:xx:xx:xx", "current V
alue"="xxxxx","configuredThreshold"="xxxxx", " radio" = "X.XG"
Displayed on the web
interface
AP [{apName&&apMac}] flagged {{radio}} capacity health [{currentValue}]
because it crossed the threshold [{configuredThreshold}].
Description This event occurs when the AP is flagged because the radio has crossed the
capacity health threshold configured by the administrator.
AP health high connection failure flag
TABLE 282 AP health high connection failure flag event
Event AP health high connection failure flag
Event Type apHealthConnectionFailureFlag
Event Code 330
Severity Warning
Attribute "apName"="xxxxx", "apMac"="xx:xx:xx:xx:xx:xx", "current V
alue"="xxxxx","configuredThreshold"="xxxxx", " radio" = "X.XG"
Displayed on the web
interface
AP [{apName&&apMac}] flagged {{radio}} capacity health [{currentValue}]
because it crossed the threshold [{configuredThreshold}].
Description This event occurs when AP is flagged because the AP has crossed the
connection failure health threshold configured by the administrator.
Events Types
AP State Change Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A 181