Ruckus Wireless Virtual SmartZone High Scale User Manual

TABLE 659 HIP failed over event (continued)
Event HIP failed over
Description This event is logged when the standby HIP transits to an active mode and
includes the control plane identifier of the newly active HIP.
Standby HIP restarted
NOTE
This event is not applicable for vSZ-H.
TABLE 660 Standby HIP restarted event
Event Standby HIP restarted
Event Type hipStandbyRestart
Event Code 1017
Severity Informational
Attribute “ctrlBladeMac"="50:A7:33:24:E7:90", "srcProcess"="HIP", "realm"="NA",
"processName"="HIP", "SCGMgmtIp"="100.13.0.102”
Displayed on the web
interface
[{srcProcess}] Standby HIP node failed detected from Active
{produce.short.name} [{SCGMgmtIp}]
Description This event is logged when the active node detects failure of the standby node.
HIP cache cleaned
NOTE
This event is not applicable for vSZ-H.
TABLE 661 HIP cache cleaned event
Event HIP cache cleaned
Event Type hipCacheCleanup
Event Code 1018
Severity Informational
Attribute “ctrlBladeMac"="50:A7:33:24:E7:90", "srcProcess"="HIP", "realm"="NA",
"processName"="HIP", "SCGMgmtIp"="100.13.0.102",
mvnoId="12", hlrProfileName="HLR1",
Displayed on the web
interface
[{srcProcess}] Cache cleanup started on {produce.short.name} [{SCGMgmtIp}]
Description This event is generated when the cache cleanup process is completed.
All data planes in the zone affinity profile are disconnected
NOTE
Events 1257 to 1267 are not applicable to SCG.
TABLE 662 All data planes in the zone affinity profile are disconnected event
Event All data planes in the zone affinity profile are disconnected
Event Type zoneAffinityLastDpDisconnected
Events Types
System Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
316 Part Number: 800-71565-001 Rev A

Ruckus Wireless Virtual SmartZone High Scale Specifications

General

Brand	Ruckus Wireless
Model	Virtual SmartZone High Scale
Category	Gateway
Language	English