Ruckus Wireless Virtual SmartZone High Scale - AP Join Zone Failed; AP Illegal to Change Country Code; AP Configuration Get Failed

TABLE 214 AP WLAN oversubscribed event (continued)
Event AP WLAN oversubscribed
Attribute "apMac"="xx:xx:xx:xx:xx:xx"
Displayed on the web
interface
AP [{apName&&apMac}] does not have enough capacity to deploy all wlans. Only
maximum wlan number of the AP can be deployed
Description This event occurs when the AP exceeds the maximum capacity for deploying all
WLANs.
AP join zone failed
TABLE 215 AP join zone failed event
Event AP join zone failed
Event Type apJoinZoneFailed
Event Code 115
Severity Major
Attribute "apMac"=”xx:xx:xx:xx:xx:xx”, "zoneUUID"=”xx:xx:xx:xx:xx:xx”,
"targetZoneUUID"=”xx:xx:xx:xx:xx:xx”, "reason"=”xx:xx:xx:xx:xx:xx”
Displayed on the web
interface
AP [{apName&&apMac}] failed to join to zone [{targetZoneName}]. Reason:
[{reason}]
Description This event occurs when the AP fails to join the specified zone.
AP illegal to change country code
TABLE 216 AP illegal to change country code event
Event AP illegal to change country code
Event Type apIllgalToChangeCountryCode
Event Code 116
Severity Informational
Attribute “apMac”=“xxx.xxx.xxx.xxx” , “configID”=“23456781234”
Displayed on the web
interface
AP [{apName&&apMac}] does not support country code change.
Description This event occurs when attempting to change the country code for an AP.
Changing of country code is not allowed.
AP configuration get failed
TABLE 217 AP configuration get failed event
Event AP configuration get failed
Event Type apGetConfigFailed
Event Code 117
Severity Informational
Attribute "apMac"="xxx.xxx.xxx.xxx" , "configID"="23456781234"
Displayed on the web
interface
AP [{apName&&apMac}] failed to get the configuration [{configID}].
Events Types
AP Communication Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A 159