TABLE 709 Data plane set up a tunnel event (continued)
Event Data plane set up a tunnel
Displayed on the web
interface
Data plane [{dpName||dfpMac}] set up a tunnel from AP [{apName&&apMac}].
Description This event occurs when the data plane sets up a tunnel from the AP.
AP secure gateway association success
TABLE 710 AP secure gateway association success event
Event AP secure gateway association success
Event Type ipsecTunnelAssociated
Event Code 660
Severity Informational
Attribute "apMac"="xx:xx:xx:xx:xx:xx","ipsecGWAddress"="x.x.x.x"
Displayed on the web
interface
AP [{apName&&apMac}] is able to reach secure gateway [{ipsecGWAddress}]
successfully.
Description This event occurs when the AP is able to reach the secure gateway successfully.
AP is disconnected from secure gateway
TABLE 711 AP is disconnected from secure gateway event
Event AP is disconnected from secure gateway
Event Type ipsecTunnelDisassociated
Event Code 661
Severity Major
Attribute "apMac"="xx:xx:xx:xx:xx:xx","ipsecGWAddress"="x.x.x.x"
Displayed on the web
interface
AP [{apName&&apMac}] is disconnected from secure gateway
[{ipsecGWAddress}].
Description This event occurs when the AP is disconnected from secure gateway.
AP secure gateway association failure
TABLE 712 AP secure gateway association failure event
Event AP secure gateway association failure
Event Type ipsecTunnelAssociateFailed
Event Code 662
Severity Major
Attribute "apMac"="xx:xx:xx:xx:xx:xx","ipsecGWAddress"="x.x.x.x"
Displayed on the web
interface
AP [{apName&&apMac}] is unable to establish secure gateway with
[{ipsecGWAddress}].
Description This event occurs when the AP is unable to reach the secure gateway.
Auto Clearance This event triggers the alarm 662, which is auto cleared by the event code 660.
Events Types
Tunnel Events - Access Point (AP)
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A 335
To Next Page
Loading...
