Ruckus Wireless Virtual SmartZone High Scale - Cluster Backup Completed; Cluster Backup Failed; Cluster Restore Completed

TABLE 387 Cluster back in service event (continued)
Event Cluster back in service
Event Code 808
Severity Informational
Attribute “clusterName”=”xxx”
Displayed on the web
interface
[{clusterName}] is now in service
Description This event occurs when a cluster is back in service.
Cluster backup completed
TABLE 388 Cluster backup completed event
Event Cluster backup completed
Event Type backupClusterSuccess
Event Code 809
Severity Informational
Attribute “clusterName”=”xxx”
Displayed on the web
interface
Cluster [{clusterName}] backup completed
Description This event occurs when a cluster backup is complete.
Cluster backup failed
TABLE 389 Cluster backup failed event
Event Cluster backup failed
Event Type backupClusterFailed
Event Code 810
Severity Major
Attribute “clusterName”=”xxx”
Displayed on the web
interface
Cluster [{clusterName}] backup failed. Reason[{reason}].
Description This event occurs when a cluster backup fails.
Auto Clearance This event triggers the alarm 805, which is auto cleared by the event code 809.
Cluster restore completed
TABLE 390 Cluster restore completed event
Event Cluster restore completed
Event Type restoreClusterSuccess
Event Code 811
Severity Informational
Attribute "nodeName”=”xxx”, "clusterName"="xxx",
Displayed on the web
interface
Node [{nodeName}] in cluster [{clusterName}] restore completed
Events Types
Cluster Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
222 Part Number: 800-71565-001 Rev A