TABLE 443 Not management service ready event (continued)
Event Not management service ready
Attribute “clusterName”=“xx”, “nodeName”=“xx”, “reason”=“xxx”
Displayed on the web
interface
Not all management services on Node [{nodeName}] in cluster [{clusterName}]
are ready. Reason\:[{reason}].
Description This event occurs when any applications of the node is down and the
management service state is marked as out of service
Management service ready
TABLE 444 Management service ready event
Event Managementl service ready
Event Type allServiceInService
Event Code 873
Severity Informational
Attribute “clusterName”=“xx”, “nodeName”=“xx
Displayed on the web
interface
All management services on Node [{nodeName}] in cluster [{clusterName}] are
ready
Description This event occurs when all applications of the node is in service and the
management service state is marked as in service.
Configuration sync failed
TABLE 445 Configuration sync failedevent
Event Configuration sync failed
Event Type clusterRedundancySyncCfgFailed
Event Code 874
Severity Major
Attribute “clusterName”=“xx”, “reason”=“xxx”
Displayed on the web
interface
Cluster [{clusterName}] configuration sync failed. Reason: [{reason}]
Description This event occurs when synchronization configuration fails in a cluster
redundancy.
Node IPv6 address added
TABLE 446 Node IPv6 address added event
Event Node IPv6 address added
Event Type nodeIPv6Added
Event Code 2501
Severity Informational
Attribute “nodeMac”=“xxx”, “ifName”=“ xx:xx:xx:xx:xx:xx”, “ip”=“xx:xx:xx:xx:xx:xx”
Displayed on the web
interface
Network interface [{networkInterface||ifName}] on node [{nodeName}] added IPv6
address [{ip}].
Description This event occurs when the node adds the IPv6 address.
Events Types
Cluster Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A 239