TABLE 93 Delete session response failed alarm (continued)
Alarm Delete session response failed
Attribute “mvnoId”=”12” “wlanId”=”1” “zoneId”=”10” “ctrlBladeMac”=”aa:bb:cc:dd:ee:ff”
“srcProcess”=”aut” “realm”= ”wlan.mnc080.mcc405.3gppnetwork.org"
“gtpcIp”=”5.5.5.5” “pgwIp”=”1.1.1.1” "SCGMgmtIp"="2.2.2.2"
“ueMacAddr”=”aa:bb:cc:gg:hh:ii” “ueImsi”=”12345” “ueMsisdn”=”98787”
“apn”=”ruckus.com” “cause”=”<reason for failure>”
Displayed on the web
interface
[{srcProcess}] Delete Session response from PDN GW with IP [{pgwIp}] on
{produce.short.name} [{SCGMgmtIp}] failed, for UE with username
[{ueImsi}@{realm}] because [{cause}]
Description Delete session response from PDN GW fails due to the specified cause.
Recommended Actions Download the SM log to check the cause of the error.
Delete bearer request failed
TABLE 94 Delete bearer request failed alarm
Alarm Delete bearer request failed
Alarm Type deleteBearerRequestFailed
Alarm Code 1958
Severity Major
Aggregation Policy From the event code 1958 an alarm is raised for every event. A single event
triggers a single alarm.
Attribute “ctrlBladeMac”=”aa:bb:cc:dd:ee:ff” “srcProcess”=”aut” “realm”= ”NA"
“gtpcIp”=”5.5.5.5” “pgwIp”=”1.1.1.1” "SCGMgmtIp"="2.2.2.2" “cause”=”<reason
for failure>”
Displayed on the web
interface
[{srcProcess}] Delete Bearer Request from PDN GW with IP [{pgwIp}] on
{produce.short.name} [{SCGMgmtIp}] failed, for UE with username
[{ueImsi}@{realm}] because [{cause}]
Description This alarm is triggered when the delete bearer request from PDN GW fails.
Recommended Actions Download the SM log to check the cause of the error.
Update bearer request failed
TABLE 95 Update bearer request failed alarm
Alarm Update bearer request failed
Alarm Type updateBearerRequestFailed
Alarm Code 1959
Severity Major
Aggregation Policy From the event code 1959 an alarm is raised for every event. A single event
triggers a single alarm.
Attribute “ctrlBladeMac”=”aa:bb:cc:dd:ee:ff” “srcProcess”=”aut” “realm”= ”NA"
“gtpcIp”=”5.5.5.5” “pgwIp”=”1.1.1.1” "SCGMgmtIp"="2.2.2.2" “cause”=”<reason
for failure>”
Displayed on the web
interface
[{srcProcess}] Update bearer request from PDN GW with IP [{pgwIp}] on
{produce.short.name} [{SCGMgmtIp}] failed, for UE with username
[{ueImsi}@{realm}] because [{cause}]
Description Update bearer request failed, decode failed.
Recommended Actions Download the SM log to check the cause of the error.
Alarm Types
Gn/S2a Interface Alarms
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
102 Part Number: 800-71565-001 Rev A