Ruckus Wireless Virtual SmartZone High Scale User Manual

TABLE 597 DHCP connected event (continued)
Event DHCP connected
Description This event occurs when the PMIPv6 completes the configuration procedure
successfully.
DHCP connection lost
TABLE 598 DHCP connection lost event
Event DHCP connection lost
Event Type lostCnxnToDHCP
Event Code 5102
Severity Debug
Attribute “ctrlBladeMac”=“aa:bb:cc:dd:ee:ff”,”SCGMgmtIp”=“2.2.2.2”
Displayed on the web
interface
PMIPv6 process cannot connect to DHCP server on {produce.short.name}
[{SCGMgmtIp}]
Description This event occurs when the connection between PMIPv6 process and DHCP
server is lost.
Auto Clearance This event triggers the alarm 5102, which is auto cleared by the event code 5101.
NOTE
Refer to PMIPv6 Alarms on page 116.
SCI Events
Following are the events related to SCI (Small Cell Insight).
• Connect to SCI on page 294
• Disconnect to SCI on page 295
• Connect to SCI failure on page 295
• SCI has been disabled on page 295
• SCI and FTP have been disabled on page 295
Connect to SCI
TABLE 599 Connect to SCI event
Event Connect to SCI
Event Type connectedToSci
Event Code 4001
Severity Informational
Attribute "id"="SCI Server","ip"="2.2.2.2","port"="8883","userName"="admin"
Displayed on the web
interface
Connect to SCI with system id [{id}],address [{ip}:{port}] and login user
[{userName}].
Description This event occurs when the controller connects to SCI.
Events Types
SCI Events
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
294 Part Number: 800-71565-001 Rev A

Ruckus Wireless Virtual SmartZone High Scale Specifications

General

Brand	Ruckus Wireless
Model	Virtual SmartZone High Scale
Category	Gateway
Language	English