Under the LDAP Advanced tab, you can set the search filter and the LDAP login attribute.
Fill in the following fields, as desired:
Search filter—This is the LDAP search filter. Example: objectclass=user.
Login Attribute—This is the LDAP login attribute. Example: sAMAccountName.
Verify Certificate (checkpeer) —Select this checkbox if you wish to turn on checkpeer
authentication.
LDAP Servers Settings
Under the Servers tab, you manage the LDAP server(s) to be accessed:
Under the LDAP Servers tab, the window displays:
Server—The hostname(s) or IP address(es) of the LDAP server(s) that have been added.
Action—After a server has been listed, it can be removed by clicking the X-button.
LDAP Server Status—This will display one of the following states:
PASS (green)—An LDAP server that has been set up is available and is able to
pass data.
CONFIGURATION MISSING (red)—No configuration files are available.
FAILED TO READ DATA (red)—An LDAP server is available but no data was
passed.
FAILED NOT REACHABLE (red)—No LDAP server could be reached.
LDAP DISABLED—The Enabled checkbox under the Settings tab as not been selec-
ted.
260
CHAPTER 4 • SecureSync User Reference Guide Rev. 26
4.3 Managing Users and Security
To Next Page
Loading...
