Spectracom SecureSync User Manual

Temperature readings are subject to environmental conditions and hardware configuration
e.g., oscillator type. Under normal operating conditions, all temperatures should remain fairly
constant. Drastic changes may indicate e.g., a problem with the fan. Note that the oscillator tem-
perature will have a direct impact on its accuracy, i.e. there is a strong correlation between dis-
ciplining performance and oscillator temperature.
Setting Temperature Monitoring Alarms
Navigate to MANAGEMENT > OTHER: Notifications. In the Events panel, select the System tab:
4.5 Quality Management
CHAPTER 4 • SecureSync User Reference Guide Rev. 26
301

Spectracom SecureSync Specifications

General

Model	SecureSync
Time Reference	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Disciplines	GNSS, IRIG, PTP, NTP, SyncE
Inputs	GPS, GLONASS, BeiDou, Galileo, IRIG, NTP, PTP, 1PPS
Outputs	NTP, PTP, 1PPS, IRIG
Protocols	PTP, NTP, SNMP, SSH, HTTPS
Form Factor	1U Rack-mount
Redundancy	Optional redundant power supply
Security Features	Password protection, access control lists, SSH, HTTPS, SNMPv3, NTP authentication, PTP authentication
Power Supply	100-240 VAC, 50-60 Hz
Operating Temperature	0°C to +50°C
Dimensions	44.45 mm (H) x 482.6 mm (W)