DANGER! If the equipment is used in a manner not specified by the manufacturer,
the protection provided by the equipment may be impaired.
Before you begin installing and configuring the product, carefully read the following important
safety statements. Always ensure that you adhere to any and all applicable safety warnings,
guidelines, or precautions during the installation, operation, and maintenance of your product.
DANGER! — INSTALLATION OF EQUIPMENT:
Installation of this product is to be done by authorized service personnel
only.This product is not to be installed by users/operators without legal author-
ization.
Installation of the equipment must comply with local and national electrical codes.
DANGER! — DONOTOPENEQUIPMENT, UNLESSAUTHORIZED:
The interior of this equipment does not have any user serviceable parts. Contact
Spectracom Technical Support if this equipment needs to be serviced. Do not
open the equipment, unless instructed to do so by Spectracom Service personnel.
Follow Spectracom Safety Instructions, and observe all local electrical regulatory
requirements.
DANGER! – IF THE EQUIPMENT MUST BE OPENED:
Never remove the cover or blank option card plates with power
applied to this unit. The unit may contain more than one power source. Dis-
connect AC and DCpower supply cords before removing the cover to avoid elec-
tric shock.
DANGER! — FUSING:
The equipment has Double Pole/Neutral Line Fusing on AC power.
34
CHAPTER 2 • SecureSync User Reference Guide Rev. 26
2.4 SAFETY
To Next Page
Loading...
