Symmetricom TimeProvider 5000 User Manual

120 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
Chapter 3
TimeProvider 5000 CLI Command Set
show eth config
The Show Ethernet Configuration command displays the Ethernet auto-negotiation
state and speed for the ports on the specified IOC module or expansion shelf.
Command Syntax:
show eth config {ioc1 | exp[0-9]}
Example 1:
To display the current configuration for the Ethernet ports on the IOC modules 
tp5000> show eth config ioc1
Response 1:
eth1 auto-neg state: enable
eth1 auto-neg speed: all
eth2 auto-neg state: enable
eth2 auto-neg speed: all
Example 2:
To display the current configuration for the Ethernet ports on expansion shelf ID=4 
tp5000> show eth config exp4
Response 2:

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English