Symmetricom TimeProvider 5000 User Manual

098-00028-000 Revision F – May, 2012 TimeProvider 5000 User’s Guide 407
Appendix A System Messages
System Notification Messages
 host_name = hostname
 process-name = alarmd
 AlarmID = 000 thru Max_AlarmID
 Index = 0 thru 63
 Severity = Event | Minor | Major | Critical (defined by severity code)
 MsgText = (see tables)
The following is an example syslog message showing Input Port 1 loss of signal:
Aug 19 21:23:12 TP5000 alarmd: 035,003,Minor, IOC1: Input
Port-1 Loss of Signal
Syslog messages are stored according to facility code and/or severity:
 Syslog messages with facility code 4 are stored in the Security Log.
 Syslog messages with facility code 20 and a severity of 2 | 3 | 4 are stored in the
Alarm Log.
 Syslog messages with facility code 20 and a severity of 5 are stored in the Event
Log.
 Syslog messages with facility code 21 are stored in the Command Log.
 Syslog messages with facility code 22 are not stored in the TP5000. They can
be forwarded to the remote syslog server.
System Notification Messages
Table A-1 provides a list of system notification messages. These messages are
logged and sent to a remote syslog server if configured. Alarms will also generate
an SNMP trap.

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English