30 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
Chapter 1 Overview
Overview
Overview
The TimeProvider 5000 is a Next Generation Network (NGN) packet-based timing
and frequency device that combines the functionality of a highly-accurate, IEEE
1588 2008 Grand Master Clock and/or NTP server with T1/E1 I/O ports,
1PPS/10MHz and expansion (DTI) interconnect ports, and 1PPS+TOD inputs. The
TimeProvider 5000, available with either a Quartz or Rubidium oscillator,
incorporates hardware-based time stamping to provide the highest level of timing
and frequency accuracy over a broad range of wireline and wireless application.
The TimeProvider 5000 system consists of a TP5000, a new TimeProvider E10
output expansion shelf with Gigabit SyncE/PTP, and a new TimeProvider E30
output expansion shelf with E1 and 1PPS+TOD ports. This document describes the
TimeProvider 5000 system.
A new functionality for the TimeProvider 5000 is NTP server capability, which
supports up to a maximum of 120,000 NTP transactions/second in unicast mode.
The TimeProvider 5000 can be purchased as either a dedicated NTP server or as a
unit which supports both PTP and NTP.
TimeProvider 5000 Features
TimeProvider E30 E1 / 1PPS+TOD expansion shelf (optional)
TimeProvider E10 PTP / SyncE expansion shelf (optional)
Beidou navigation satellite RF input option on IMC card
1PPS+TOD input option on I/O card
Expansion server ports on I/O card
Expansion DTI / Ethernet management port on IMC card
Compact 1 RU Footprint
ETSI Compliant: Front Access for all Connectors
Dual –48 VDC Power Connectors
Up to 2 E1/T1 Legacy Inputs
Up to 4 Legacy Outputs
2 SFP Connectors on each IOC
1 L1 GPS Input on the IMC (2 GPS Inputs are optional)
1 Ethernet Mgmt Port on the IMC
1 EIA-232 Serial (Craft) Port on the IMC
LED indicators on the IOC and IMC
Hardware Protected
To Next Page
Loading...
Need help?
General
