Symmetricom TimeProvider 5000 User Manual

098-00028-000 Revision F – May, 2012 TimeProvider 5000 User’s Guide 495
Appendix F PTP Probe Option
This appendix describes the procedures for installing, provisioning, and operating
the TimeProvider 5000 in Probe mode.
In This Appendix
 Overview
 Requirements for Measurements
 Installing the Probe
 Controlling the Probe With TimeMonitor PDV
 Provisioning the Probe
– Enable the Probe Option on the TP 5000
– Enable Port as a PTP Probe
– Return Port to Grandmaster Mode
– Set the IP Address for Probe MGMT Port
– Set Probe IP Address
– Set Grandmaster PTP IP Address
– Set Synchronization Interval
– Set Lease Duration
 Operating the Probe
 Probe Data
 Analyzing Probe Data

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English