098-00028-000 Revision F – May, 2012 TimeProvider 5000 User’s Guide 349
Chapter 4 Provisioning
Saving and Restoring Provisioning Data
To display the system status, enter the following:
1. Type
show status and press Enter.
Saving and Restoring Provisioning Data
Symmetricom recommends that you keep an electronic version and/or a written
version of the provisioning changes you make to the TimeProvider 5000. Use the
set configuration command to back up or restore provisioning data. See Figure
4-35.
Figure 4-35. Set Configuration Command Hierarchy