Symmetricom TimeProvider 5000 User Manual

098-00028-000 Revision F – May, 2012 TimeProvider 5000 User’s Guide 347
Chapter 4 Provisioning
Provisioning Alarms
Figure 4-34. Set Alarm-Config Commands
Disabling Specific Alarms
The Set Alarm-Config command allows you to enable or disable specified alarms.
Example
To disable the GNSS/GPS antenna open-circuit alarm (alarm #13), enter the
following:
1. Login at the Admin or Config-user level (see Logging In, on page 275).
2. Type
set alarm-config state alarm 13 disable and press Enter.
Showing Current Alarm Settings
The Show Alarm-Config command displays the set and clear alarm thresholds for
every alarm type.
Example

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English