144 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
Chapter 3
TimeProvider 5000 CLI Command Set
show hostname
This command displays the host name for the TimeProvider 5000.
Command Syntax:
show hostname
Example:
tp5000> show hostname
Response
Host name - TP5000
Level : User, Config, and Admin
set hostname
This command sets the host name for the TimeProvider 5000. Hostname can
contain up to 20 characters.
Command Syntax:
set hostname <hostname_string>
Example:
To set the hostname to “PTPhost3”
tp5000> set hostname PTPhost3
Level : Config and Admin only
Note: The hostname will be used for the SNMP sysName object.
However, if sysName is changed via SNMP, SNMP will then use the
updated value until the next restart of SNMP, but hostname will not be
changed.