Symmetricom TimeProvider 5000 User Manual

452 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
Appendix B Specifications and Factory Defaults
Factory Defaults
Telecom Input Port 1 SSM Bit 8 4 | 5 | 6 | 7 | 8
Telecom Input Port 1 SSM PQL
Value
3 1 to 9
Telecom Input Port 2 State Enable Enable | Disable
Telecom Input Port 2 Priority 8 1 to 16
Telecom Input Port 2 Frame
Type
freq2048khz D4 | ESF | CCS | CAS |
freq2048khz | freq1544khz
Telecom Input Port 2 CRC Disable Enable | Disable
Telecom Input Port 2 SSM
State
Disable Enable | Disable
(see note below)
Telecom Input Port 2 SSM Bit 8 4 | 5 | 6 | 7 | 8
Telecom Input Port 2 SSM PQL
Value
3 1 to 9
Note: The reference criteria MANUAL is no longer supported. Only
PRIORITY and SSM are supported for reference selection.
Manual selection of a reference input can be done by disabling all
reference input ports except the desired one.
The “set ref override” command is no longer supported.
Table B-21. Telecom Input / Output Parameters
Description Default Value Value Range
Telecom IO Port 1 Input Input | Output
Telecom IO Port 2 Input Input | Output
Table B-20. GPS, GNSS, and Input Port Parameters (Continued)
Description Default Value Value Range

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English