Symmetricom TimeProvider 5000 User Manual

098-00028-000 Revision F – May, 2012 TimeProvider 5000 User’s Guide 509
Appendix F PTP Probe Option
Provisioning the Probe
3. Enter the Password for the TP 5000 Probe at the prompt in the main display.
Click the Enter button on the user’s computer. The TP 5000 prompt will appear.
tp5000>
4. Enter the command at the TP 5000 prompt and click Enter.
Example:
Installing TimeMonitor
Refer to the TimeMonitor PDV User’s Guide for instructions on installing the
TimeMonitor software suite.
Provisioning the Probe
Establish a Connection to the TP 5000 Probe
When using TimeMonitor PDV to provision the TP 5000, the first step is to connect
the serial port of the computer to the Craft port on the IMC module.
The MGMT port on the IMC can also be used for the initial connection, assuming
that the default IP address of the MGMT port does not conflict with the network. Use
an Ethernet cable to connect the MGMT port of the TP 5000 to the network.

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English