448 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
Appendix B Specifications and Factory Defaults
Factory Defaults
Factory Defaults
TP 5000 Main Shelf Defaults
Table B-19. General and Communication Parameters
Description Default Value Value Range
Reference Mode
(Replaces Time-of-Day Source)
Time Time | Frequency
Time-of-Day Source
(This parameter has been
deprecated and will be
removed in v2.0)
GPS GPS | SYS
Telnet Firewall Block Allow | Block
ICMP Firewall Allow Allow | Block
SSH Firewall Allow Allow | Block
SNMP Firewall Allow Allow | Block
FTP Firewall Block Allow | Block
SFTP Firewall Allow Allow | Block
User #1 Name admin 20 ASCII Characters
User #1 Password symmadmin** 32 ASCII Characters, a Minimum of 8
User #1 Access level admin user | config |admin
IMC EIA-232 Port 57.6k-8-N-1 fixed
IMC IP Mode Static DHCP | Static
IMC IP State Enable Enable | Disable
IMC IP Address 192.168.0.100 Valid IPv4 Address
IMC Gateway Address 0.0.0.0 Valid IPv4 Address, where value of
0.0.0.0 is used for no gateway
IMC Network Mask 255.255.255.0 Valid IPv4 Mask
Intra-System
Communication Class
B: 172.16.250.8
to
172.16.250.63
IP address ranges:
A: 10.0.250.8 to 10.0.250.63
B: to 172.16.250.63
C: 192.168.250.8 to 192.168.250.63
IMC Exp-IF ETH State Enable (v1.3)
Disable (v2.0)
Enable | Disable
IMC Exp-IF DTI State Enable Enable | Disable