Symmetricom TimeProvider 5000 User Manual

26 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
How to Use This Guide
Related Documents and Information
Related Documents and Information
See your Symmetricom representative or sales office for a complete list of available
documentation.
Where to Find Answers to Product and Document
Questions
For additional information about the products described in this guide, please contact
your Symmetricom representative or your local sales office. You can also contact us
on the web at www.symmetricom.com.
What’s New In This Guide
The following corrections and additions have been made to the TimeProvider 5000
User’s Guide since Rev. E:
 Expanded descriptions of Timeprovider E10 and E30 expansion shelves in
Chapter 1, added installation instruction in Chapter 2, and added specifications
and default values in Appendix B
 Added cable and connector details to Chapter 2 and Appendix B
 Corrected Probe data format details in Appendix F
 Updated Firmware Upgrade procedures in Chapter 6
The following corrections and additions have been made to the TimeProvider 5000
User’s Guide since Rev. D:
 Added description of high capacity NTP server capability with hardware
timestamping in Chapter 1, and provisioning details in Chapter 4
 Added description of Timeprovider E10 and E30 expansion shelves in Chapter 1,
installation instruction in Chapter 2, and provisioning details in Chapter 4.
 Added new CLI commands, modified existing CLI commands in Chapter 3 to
support NTP server capability, expansion shelves, PTP probe option, and other
new features. See Figure 3-1 for a summary of CLI commands.
Note: The documents TimeProvider E10 User’s Guide
(098-00360-000) and TimeProvider E30 User’s Guide
(098-00364-000) have been obsoleted. The contents from these
documents have been incorporated into this User’s Guide.

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English