098-00028-000 Revision F – May, 2012 TimeProvider 5000 User’s Guide 457
Appendix B Specifications and Factory Defaults
Factory Defaults
Table B-31. PTP Grand Master Unicast Parameters
Description Default Value Value Range
PTP IOCx-y Dynamic Unicast
Negotiation
Enable Enable | Disable
PTP IOCx-y Dynamic Unicast
Lease Duration
1000 10 to 1000 seconds
PTP IOCx-y Static Unicast State
(A maximum of 10 clients can be
assigned)
Disable Enable | Disable
PTP IOCx-y Static Unicast IP
Address
0.0.0.0 Valid IPv4 Address
PTP IOCx-y Static Unicast Clock
ID
ff:ff:ff:ff:ff:ff:ff:ff 64-bit Value
PTP IOCx-y Static Unicast VLAN
ID
0 1 to 4094,
0 is used to signify no VLAN
PTP IOCx-y Static Unicast Sync
Message Rate (2^y)
–3 –7 to 7
PTP IOCx-y Static Unicast
Announce Message Rate (2^y)
1 –4 to 4
PTP IOCx-y Static Unicast Delay
Response Message Rate (2^y)
–3 –7 to 7
Table B-32. PTP Grand Master Multicast Parameters
Description Default Value Value Range
PTP IOCx-y Multicast Client
Timeout
300 10 to 3600 seconds
PTP IOCx-y Multicast Announce
Timeout
3 2 to 10
PTP IOCx-y Multicast VLAN ID 0 0 to 4094,
0 is used to signify no VLAN
PTP IOCx-y Multicast Sync
Message Rate (2^y)
–1 for default profile
–6 for hybrid profile
–7 to 7