Symmetricom TimeProvider 5000 User Manual

098-00028-000 Revision F – May, 2012 TimeProvider 5000 User’s Guide 497
Appendix F PTP Probe Option
Overview
The Probe function is an optional feature of the TimeProvider 5000. The Probe
function is enabled via a special software key. If a TimeProvider 5000 is configured
in Probe mode, it cannot be used in Grandmaster mode at the same time.
Figure F-1. IEEE-1588 Grandmaster Server and Client
Figure F-2. IEEE-1588 Grandmaster Server and Probe
Note: The PTP probe option must be purchased to enable the
functionality of all “ptp-probe” commands.

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English