Symmetricom TimeProvider 5000 User Manual

518 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
Appendix F PTP Probe Option
Provisioning the Probe
See Table F-10 for procedures to set the lease duration.
Table F-10. Set Lease Duration Procedures
TimeMonitor PDV CLI Command
1. Click on the Command radio button to put
TimeMonitor PDV into the proper mode for
making Probe changes.
2. Click the Login button to login to the Probe.
The Probe will prompt for Username and
Password.
3. In the Duration box (see Item 5), enter the
desired value for the lease duration in seconds.
Use the command:
set ptp-probe IOC1-x
active-probe duration <value>
where x is the port number on the IOC card
Example:
For a duration of 500 on Port 1 of IOC1:
1. Login at the Admin or Config-user
level.
2. Type set ptp-probe ioc1-1
active-probe duration 500 and
press Enter.

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English