Symmetricom TimeProvider 5000 User Manual

098-00028-000 Revision F – May, 2012 TimeProvider 5000 User’s Guide 339
Chapter 4 Provisioning
Provisioning Expansion Shelf E1 / 1PPS+TOD Outputs
4. Type set output-exp e1 holdover exp0 all on and press Enter.
5. Type
set output-exp e1 fast-track exp0 all ais and press Enter.
Figure 4-30. Expansion Shelf - Set Output-Exp Generation Command Hierarchy
Provisioning 1PPS +TOD Outputs for Expansion Shelf
The state of the 1PPS+TOD outputs can be provisioned on the TP E30
E1/1PPS+TOD expansion shelf, as well as the output generation behavior for each
1PPS+TOD port.
See Figure 4-29 and Figure 4-30 for the hierarchy of commands to provision the
expansion shelf 1PPS+TOD outputs.
State of Output Ports
The state of output ports can be configured independently for individual ports on the
specified expansion shelf or all 1PPS+TOD ports can be set to the same state on
the specified expansion shelf with a single command.
1. Login at the Admin or Config-user level.
2. Type
set output-exp pps-tod state exp0 port 4 enable and press Enter.

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English