Symmetricom TimeProvider 5000 User Manual

098-00028-000 Revision F – May, 2012 TimeProvider 5000 User’s Guide 73
Chapter 2 Installing
Signal Connections
Only the SFP transceivers in Table 2-4 are recommended and supported. Other
SFP transceivers are not supported and may cause the TimeProvider 5000 to not
comply with regulatory requirements. Figure 2-17 shows a typical optical SFP
transceiver.
Figure 2-17. Optical SFP Transceiver
Figure 2-18. Output Connections for E1 Versions of I/O Module
Table 2-4. Recommended and Supported SFP Transceivers
Type Transceiver
Optical 1000 Base-LX Single-Mode Ethernet 1310nm
(Symmetricom 121-20621-10-2)
Avago AFCT-5701PZ
Finisar FTLF1319P1BTL
Optical 1000 Base-SX Multi-Mode Ethernet 850nm
(Symmetricom 121-20621-11-2)
Avago AFBR-5710PZ
Finisar FTLF8519P2BNL
RJ45 100/1000/1GbE Base-T Full-Duplex
(Symmetricom 121-20621-12-2)
Avago ABCU-5710RZ
Note: Recommended and supported SFP connectors comply with
FDA radiation performance standards, 21 CFR Subchapter J.

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English