Symmetricom TimeProvider 5000 User Manual

454 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
Appendix B Specifications and Factory Defaults
Factory Defaults
1PPS Output Port State Enable Enable | Disable
1PPS Output Generation 
Warm-up
Squelch Squelch | On
1PPS Output Generation 
Free-run
Squelch Squelch | On
1PPS Output Generation 
Holdover
On Squelch | On
1PPS Output Generation 
Fast-track
On Squelch | On
Table B-25. PTP Grand Master Port IP Parameters
Description Default Value Value Range
IOC1-y IP Address
IOC
1-1
IOC
1-2
192.168.1.11
192.168.2.11
Valid IPv4 Address
IOC1-y IP Mask 255.255.255.0 Valid IPv4 Mask
IOC1-y IP Gateway 0.0.0.0 Valid IPv4 Address, special
value of 0.0.0.0 is used for
no gateway
IOC1 Port Redundancy
(Bonding)
Disable Enable | Disable
IOC IP State Enable Enable | Disable
Table B-26. VLAN Parameters - Fixed Index (1  16)
Description Default Value Value Range
IOCx-y Address
IOC
1-1
IOC
1-2
No VLAN configured Valid IPv4 Address
IOC1-y Mask No VLAN configured Valid IPv4 Mask
IOC1-y Gateway No VLAN configured Valid IPv4 Address
ID 0
(not visible in VLAN table)
1 to 4094
Table B-24. Output Port Parameters (Continued)
Description Default Value Value range

Symmetricom TimeProvider 5000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 5000
Category	Server
Language	English