276 TimeProvider 5000 User’s Guide 098-00028-000 Revision F – May, 2012
Chapter 4 Provisioning
Managing the User Access List
3. Type set user add and press TAB twice. The system prompts you for a user
name.
4. Type a user name and press SPACE and then TAB. The name you enter will be
the log-in name for the user. The system prompts you for the access-level for the
user.
5. Type in the desired access-level (user, config, or admin) and press Enter. The
system prompts you for a password.
6. Type a password and press Enter. The password you enter will be the log-in
password for the user. The system responds with the confirm password prompt.
7. Retype the password and press Enter. The system indicates that “
CLI user has
been added: <user>
”.
8. Type
show user and press Enter to verify that the account exists.
9. Repeat steps 3 through 8 of this procedure to add other users.
Deleting A User
Use the following procedure to delete user ABCD1234 from the system access list.
Do not delete the default username and password.
1. Login at the Admin level (see Logging In, on page 275).
2. Type
show user and press Enter to view the current list of users.
3. Type
set user delete ABCD1234 and press Enter.
Displaying Current Users and User Access Levels
Use the following procedure to show a list of all assigned users and their access
levels.
1. Login at the Admin level (see Logging In, on page 275).
2. Type
show user and press Enter. The system displays the current list of users.